Resultados de búsqueda de "Ascensor" en Ideas de diseño de hogar
IdealPark Srl
The new multi-story Lamborghini building, designed in collaboration with the engineering and architecture studio Prospazio from Modena, was built to obtain Class A energy certification and is the first in Italy, in the industrial field, created entirely with these characteristics. Design, safety and energy saving are the elements on which Prospazio studio based the creation of this work of architecture and engineering that reflects the extreme style of Lamborghini.
Clear shapes, a muscular character and sharp edges are the foundation of the underlying architectural concept, transforming a simple industrial space into an incredible piece of architecture with a strong identity. The Class A energy certification was obtained thanks to the use of state-of-the-art solutions and techniques, even with regards to external appearance.
The exterior facades consist of special three-layer polycarbonate walls and ventilated walls covered with ultra-thin ceramic slabs, created specifically in “Lamborghini Black”, which guarantees a high level of thermal insulation. On the second floor of the building, a ‘mini’ assembly line has been designed with state-of-the-art technology, that allows for the reproduction of all the assembly phases in a standard production line.
This allows accurate analysis of the phases of assembly of the different pre-series models, thus ensuring high standards of quality in subsequent industrial production. Covering some 5,000 square meters, Protoshop has very high-tech and functional operational areas organized on different levels.
The building is in compliance with all the latest regulations regarding earthquakes. Large windows made of triple-layer polycarbonate mounted with double chambers and filters to reduce refracted sunlight ensure proper solar illumination and a high level of thermal insulation. Lamborghini’s new building, intended for the development of prototypes and pre-series vehicles, represents a further element of Lamborghini’s strategy in terms of environmental sustainability, with the ultimate goal of becoming a zero-impact company, namely “CO2 free”, by 2015. The company is therefore aiming at a far greater energy efficiency than that required by law 1362/2010.
When compared with traditional industrial buildings of the same size, the energy saving calculated in trees “useful” to offset CO2 emissions provides for a quantity of 200 for normal buildings, while only 80 are required for this new building.
The building will also be equipped with a photovoltaic system that will ensure full coverage of the annual electrical energy required, allowing it to result in zero CO2 impact. This requirement will become a standard for all new Lamborghini buildings.
Automobili Lamborghini was the first car manufacturer in Italy to obtain the ISO 5001 certification in October 2011, which confirms the strong commitment of the company towards constant improvement in energy performance in all areas of activity.
The time needed for design and execution was also impressive: less than 15 months from the first draft to inauguration, 300 days from the beginning of construction to the finish, perfectly in line with a company accustomed to great speed.
At Lamborghini Protoshop, have been installed two car lifts Mod. IP1-HMT V07 with dual-access, certified IMQ (Italian certification body) for the transport of car and driver. Car lifts are used to move Lamborghini cars during the different phases of assembly. The platforms are 2.7 m wide and 5.37 m long, with a load capacity of 2,700 kg, which makes it possible to carry all types of cars made by the Company.
The systems have been treated with a hot-dip galvanizing process and have a 7.4 m rise connecting the two floors of the factory. They feature a speed of 15 cm per sec and a consumption of 9.5 kW.
Pendant push-button panels, connected with spiral flexible cables, were especially designed to guarantee comfort to the driver in terms of ergonomics (the push-button panel can be used either applied to a column, or from inside the car thanks to the extension cord).
These push-button panels have been installed on both sides of the car lift so as to be used in both directions, and therefore suited to left-hand drive cars also.
The authentication of the systems commands is performed through a magnetic card (badge) that, positioned in front of a reader, allows the use of the car lifts. The platform is interfaced with flame and heat sensors connected to the fire-alarm system. Furthermore, a sprinkler system has been installed beneath the upper floor of the lift shaft. Polycarbonate side guards, 1800 mm high, have been installed in order to be able to use the system also as a freight elevator. Idealpark car lifts are also in line with the building features as they ensure maximum safety to sports cars, focusing at the same time on aesthetics and user comfort.
IdealPark Srl
The top of the line realized in a beautiful villa on Geneva Lake.
IP1-CM MOB is an innovative car lift, available in two versions:
Standard: Load 2700 kg, cover flooring 150kg/mq2
XL: Load 3500 kg, cover flooring 90kg/mq2.
This extremely quiet system differs from other products on the market for the perfect integration with architecture. The platform is customizable with resin, stainless steel or Triplex painting. Unsightly fences are not in fact needed due to the presence of a series of safety features such as a camera at ground floor, a color display and LCD touch screen on board that allow to monitor the system and its surrounding area during its operation. The outside space remains completely free and livable and can be set to a garden or courtyard.
To contribute to a completely invisible and prestigious result there is the possibility of paving the roof covering with any material. Through a wide choice of colors, lighting and finishes, you can customize your system for a unique result and in harmony with the surroundings.
The cars parked in the basement are protected, as they can be removed only by inserting a coded key into the control panel to operate the plant. Even the parking lot has then its security and privacy.
For those who like to take care of the details of their home, avoiding ramps or cars parked on the surface without sacrificing green space or courtyards, the solution is the invisible garage, built using the new and exclusive system IdealPark IP1-CM MOB.
Encuentra al profesional adecuado para tu proyecto
IdealPark Srl
The top of the line realized in a beautiful villa on Geneva Lake.
IP1-CM MOB is an innovative car lift, available in two versions:
Standard: Load 2700 kg, cover flooring 150kg/mq2
XL: Load 3500 kg, cover flooring 90kg/mq2.
This extremely quiet system differs from other products on the market for the perfect integration with architecture. The platform is customizable with resin, stainless steel or Triplex painting. Unsightly fences are not in fact needed due to the presence of a series of safety features such as a camera at ground floor, a color display and LCD touch screen on board that allow to monitor the system and its surrounding area during its operation. The outside space remains completely free and livable and can be set to a garden or courtyard.
To contribute to a completely invisible and prestigious result there is the possibility of paving the roof covering with any material. Through a wide choice of colors, lighting and finishes, you can customize your system for a unique result and in harmony with the surroundings.
The cars parked in the basement are protected, as they can be removed only by inserting a coded key into the control panel to operate the plant. Even the parking lot has then its security and privacy.
For those who like to take care of the details of their home, avoiding ramps or cars parked on the surface without sacrificing green space or courtyards, the solution is the invisible garage, built using the new and exclusive system IdealPark IP1-CM MOB.
IdealPark Srl
The new multi-story Lamborghini building, designed in collaboration with the engineering and architecture studio Prospazio from Modena, was built to obtain Class A energy certification and is the first in Italy, in the industrial field, created entirely with these characteristics. Design, safety and energy saving are the elements on which Prospazio studio based the creation of this work of architecture and engineering that reflects the extreme style of Lamborghini.
Clear shapes, a muscular character and sharp edges are the foundation of the underlying architectural concept, transforming a simple industrial space into an incredible piece of architecture with a strong identity. The Class A energy certification was obtained thanks to the use of state-of-the-art solutions and techniques, even with regards to external appearance.
The exterior facades consist of special three-layer polycarbonate walls and ventilated walls covered with ultra-thin ceramic slabs, created specifically in “Lamborghini Black”, which guarantees a high level of thermal insulation. On the second floor of the building, a ‘mini’ assembly line has been designed with state-of-the-art technology, that allows for the reproduction of all the assembly phases in a standard production line.
This allows accurate analysis of the phases of assembly of the different pre-series models, thus ensuring high standards of quality in subsequent industrial production. Covering some 5,000 square meters, Protoshop has very high-tech and functional operational areas organized on different levels.
The building is in compliance with all the latest regulations regarding earthquakes. Large windows made of triple-layer polycarbonate mounted with double chambers and filters to reduce refracted sunlight ensure proper solar illumination and a high level of thermal insulation. Lamborghini’s new building, intended for the development of prototypes and pre-series vehicles, represents a further element of Lamborghini’s strategy in terms of environmental sustainability, with the ultimate goal of becoming a zero-impact company, namely “CO2 free”, by 2015. The company is therefore aiming at a far greater energy efficiency than that required by law 1362/2010.
When compared with traditional industrial buildings of the same size, the energy saving calculated in trees “useful” to offset CO2 emissions provides for a quantity of 200 for normal buildings, while only 80 are required for this new building.
The building will also be equipped with a photovoltaic system that will ensure full coverage of the annual electrical energy required, allowing it to result in zero CO2 impact. This requirement will become a standard for all new Lamborghini buildings.
Automobili Lamborghini was the first car manufacturer in Italy to obtain the ISO 5001 certification in October 2011, which confirms the strong commitment of the company towards constant improvement in energy performance in all areas of activity.
The time needed for design and execution was also impressive: less than 15 months from the first draft to inauguration, 300 days from the beginning of construction to the finish, perfectly in line with a company accustomed to great speed.
At Lamborghini Protoshop, have been installed two car lifts Mod. IP1-HMT V07 with dual-access, certified IMQ (Italian certification body) for the transport of car and driver. Car lifts are used to move Lamborghini cars during the different phases of assembly. The platforms are 2.7 m wide and 5.37 m long, with a load capacity of 2,700 kg, which makes it possible to carry all types of cars made by the Company.
The systems have been treated with a hot-dip galvanizing process and have a 7.4 m rise connecting the two floors of the factory. They feature a speed of 15 cm per sec and a consumption of 9.5 kW.
Pendant push-button panels, connected with spiral flexible cables, were especially designed to guarantee comfort to the driver in terms of ergonomics (the push-button panel can be used either applied to a column, or from inside the car thanks to the extension cord).
These push-button panels have been installed on both sides of the car lift so as to be used in both directions, and therefore suited to left-hand drive cars also.
The authentication of the systems commands is performed through a magnetic card (badge) that, positioned in front of a reader, allows the use of the car lifts. The platform is interfaced with flame and heat sensors connected to the fire-alarm system. Furthermore, a sprinkler system has been installed beneath the upper floor of the lift shaft. Polycarbonate side guards, 1800 mm high, have been installed in order to be able to use the system also as a freight elevator. Idealpark car lifts are also in line with the building features as they ensure maximum safety to sports cars, focusing at the same time on aesthetics and user comfort.
IdealPark Srl
Situated in a quiet and privileged location of the Porto-de-Mós in Lagos, Western Algarve in Portugal, this newly built contemporary style housing, with wonderful views over the sea, is a dream residence for those who enjoy the modern lifestyle, elegant and luxury.
The project was conceived by two local architects, Carlo Encarnação and Carla Duarte, for one of the most respected construction and well established companies in Lagos.
Wood and glass have been widely used in order to integrate the building in a lush environment. Spacious and glazed areas allow make the most of natural light and superb views.
The property consists of living room and dining room with fireplace, en suite bedrooms, fully equipped kitchen and laundry, cinema, games room, gym with spa and sauna, large terraces, barbecue, heated pool, double garage and beautiful and spacious garden.
The building is located in a plot with a steep slope, gaining more than ten meters from the access road to the western property boundary.
Therefore, the house develops on three floors, all accessible by elevator, where the entrance floor is located slightly below the elevation of the main road. The 2 car garage is located on the basement.
So, to avoid a large ramp slope, with movement and manoeuvre inherent difficulties, an exterior elevator IP1-CM FF42 for cars was installed between the access road and the garage located in the basement. A lift with huge versatility that allows transportation between floors and a covered parking on the car lift.
IdealPark Srl
In Selva Val Gardena, a house with particular architectural language has been designed by the Architect Office Perathoner Architects, 1,563 meters above sea level, nestled among the majestic peaks of the Dolomites, natural UNESCO heritage. It is located in the middle of a unique landscape and offers an exceptional view of the Sella massif.
The aesthetics of the entire building has a modernist flavor with clean lines, while retaining the echoes of architectural traditions with the use of traditional local materials such as stone and wood. The initial goal of the project was the search of the better integration of the building into the surrounding environment of the natural alpine landscape.
The steep slope of the terrain suggested to extend the building on four floors, with the first two levels partially underground, presenting a smaller face on the north side, while on the south side the main front opens with large windows.
The building includes three separate living units and a large underground garage accessed by an invisible car lift. The attic, open to the striking view of the landscape, is the favorite room of the house and points to a continuous return of looks and perspectives between inside and outside.
The building was built according to the criteria of energy-efficient buildings with the Certification “Casa Clima Nature” in full compliance with the environmental sustainability of the used materials.
THE CAR LIFT
The building is located on a slope with little surrounding space. Exactly for this reason and to avoid an unsightly ramp, designers have decided to install a hidden car lift. The door to access the car elevator and the whole ground floor facade were covered by natural stone to reduce the visual impact. Inside there is a second retractable motorized gate that ensures security when the platform is on the lower level.
The two closures improve not only aesthetics but also the thermal containment, given that temperatures in this mountain area in winter season become very low.
The car lift chosen for this house is the model IP1-HMT V.07, with IMQ man carrying certification.
The travel is 3.260mm, the platform size is 2.600x5.600mm and the capacity is 2,700 kg. Equipped with LED white lights on board, the plant was painted with TRIPLEX® treatment, RAL 9004, an advanced technology that creates the most complete and effective protection for the steel.
This system combines the hot dip galvanizing with powder coating process, with a series of intermediate treatments that prepare the surface to better adhere. The TRIPLEX® system can be used with a range of infinite colors and tones to adapt to the surrounding aesthetics. The shaft of the car lifts was painted black, like the elevator.
The plant is designed to ensure operation even in environments with extremely cold temperatures, through the use of special probes and heating oils.
The floor is a light gray industrial floor and the ceiling is made of brushed larch wood, specially treated to make it fire resistant.
IdealPark Srl
The new multi-story Lamborghini building, designed in collaboration with the engineering and architecture studio Prospazio from Modena, was built to obtain Class A energy certification and is the first in Italy, in the industrial field, created entirely with these characteristics. Design, safety and energy saving are the elements on which Prospazio studio based the creation of this work of architecture and engineering that reflects the extreme style of Lamborghini.
Clear shapes, a muscular character and sharp edges are the foundation of the underlying architectural concept, transforming a simple industrial space into an incredible piece of architecture with a strong identity. The Class A energy certification was obtained thanks to the use of state-of-the-art solutions and techniques, even with regards to external appearance.
The exterior facades consist of special three-layer polycarbonate walls and ventilated walls covered with ultra-thin ceramic slabs, created specifically in “Lamborghini Black”, which guarantees a high level of thermal insulation. On the second floor of the building, a ‘mini’ assembly line has been designed with state-of-the-art technology, that allows for the reproduction of all the assembly phases in a standard production line.
This allows accurate analysis of the phases of assembly of the different pre-series models, thus ensuring high standards of quality in subsequent industrial production. Covering some 5,000 square meters, Protoshop has very high-tech and functional operational areas organized on different levels.
The building is in compliance with all the latest regulations regarding earthquakes. Large windows made of triple-layer polycarbonate mounted with double chambers and filters to reduce refracted sunlight ensure proper solar illumination and a high level of thermal insulation. Lamborghini’s new building, intended for the development of prototypes and pre-series vehicles, represents a further element of Lamborghini’s strategy in terms of environmental sustainability, with the ultimate goal of becoming a zero-impact company, namely “CO2 free”, by 2015. The company is therefore aiming at a far greater energy efficiency than that required by law 1362/2010.
When compared with traditional industrial buildings of the same size, the energy saving calculated in trees “useful” to offset CO2 emissions provides for a quantity of 200 for normal buildings, while only 80 are required for this new building.
The building will also be equipped with a photovoltaic system that will ensure full coverage of the annual electrical energy required, allowing it to result in zero CO2 impact. This requirement will become a standard for all new Lamborghini buildings.
Automobili Lamborghini was the first car manufacturer in Italy to obtain the ISO 5001 certification in October 2011, which confirms the strong commitment of the company towards constant improvement in energy performance in all areas of activity.
The time needed for design and execution was also impressive: less than 15 months from the first draft to inauguration, 300 days from the beginning of construction to the finish, perfectly in line with a company accustomed to great speed.
At Lamborghini Protoshop, have been installed two car lifts Mod. IP1-HMT V07 with dual-access, certified IMQ (Italian certification body) for the transport of car and driver. Car lifts are used to move Lamborghini cars during the different phases of assembly. The platforms are 2.7 m wide and 5.37 m long, with a load capacity of 2,700 kg, which makes it possible to carry all types of cars made by the Company.
The systems have been treated with a hot-dip galvanizing process and have a 7.4 m rise connecting the two floors of the factory. They feature a speed of 15 cm per sec and a consumption of 9.5 kW.
Pendant push-button panels, connected with spiral flexible cables, were especially designed to guarantee comfort to the driver in terms of ergonomics (the push-button panel can be used either applied to a column, or from inside the car thanks to the extension cord).
These push-button panels have been installed on both sides of the car lift so as to be used in both directions, and therefore suited to left-hand drive cars also.
The authentication of the systems commands is performed through a magnetic card (badge) that, positioned in front of a reader, allows the use of the car lifts. The platform is interfaced with flame and heat sensors connected to the fire-alarm system. Furthermore, a sprinkler system has been installed beneath the upper floor of the lift shaft. Polycarbonate side guards, 1800 mm high, have been installed in order to be able to use the system also as a freight elevator. Idealpark car lifts are also in line with the building features as they ensure maximum safety to sports cars, focusing at the same time on aesthetics and user comfort.
IdealPark Srl
Situated in a quiet and privileged location of the Porto-de-Mós in Lagos, Western Algarve in Portugal, this newly built contemporary style housing, with wonderful views over the sea, is a dream residence for those who enjoy the modern lifestyle, elegant and luxury.
The project was conceived by two local architects, Carlo Encarnação and Carla Duarte, for one of the most respected construction and well established companies in Lagos.
Wood and glass have been widely used in order to integrate the building in a lush environment. Spacious and glazed areas allow make the most of natural light and superb views.
The property consists of living room and dining room with fireplace, en suite bedrooms, fully equipped kitchen and laundry, cinema, games room, gym with spa and sauna, large terraces, barbecue, heated pool, double garage and beautiful and spacious garden.
The building is located in a plot with a steep slope, gaining more than ten meters from the access road to the western property boundary.
Therefore, the house develops on three floors, all accessible by elevator, where the entrance floor is located slightly below the elevation of the main road. The 2 car garage is located on the basement.
So, to avoid a large ramp slope, with movement and manoeuvre inherent difficulties, an exterior elevator IP1-CM FF42 for cars was installed between the access road and the garage located in the basement. A lift with huge versatility that allows transportation between floors and a covered parking on the car lift.
ELEVATOR LIFT SYSTEMS INC
This photo is taken inside the elevator car featuring a stainless steel COP (Cab Operating Panel).
EKAN Construcción, Proyectos y Diseño
Modelo de recibidores y pasillos clásicos renovados de tamaño medio con paredes beige, suelo de madera en tonos medios y suelo marrón
Ascensor – Ideas para diseños residenciales
5