Houzz Logo Print
webuser_421571078

Kitchen cabinet coming apart

KS S1
hace 5 años

Hi,

I was hoping someone can help me with some feedback on what to do with a kitchen cabinet that is coming apart. The back is firmly screwed to the wall, but the sides/front are pulling away. Can this be fixed or am I going to need to replace the cabinet?


Here's different views of the cabinet with issue.






Appreciate the help.

Comentarios (10)

  • sandk
    hace 5 años
    I have a similar problem and after digging a bit, discovered the problem was likely related to it being hung as a single cabinet. My cabinets are Kraftmaid, and in the installation instructions it states that their cabinets should not be installed like that. They need either cabinets adjacent or to be screwed to something above (ceiling, soffit, another cab) or be supported by brackets. My cabinets have particle board construction and I don’t know that I would trust a repair. Even with a new cabinet, the same thing would probably happen if that applies to yours. Hopefully someone has a good solution.
  • wdccruise
    hace 5 años

    I wouldn't attempt to salvage the cabinet which is clearly coming unglued and could come crashing down if you put something heavy in it. You might consider replacing it with an Ikea cabinet (example) which hangs from a suspension rail attached to the wall.

  • PRO
    Hankins & Associates, Inc. - Kitchens and Baths
    hace 5 años
    Remove the cabinet from the wall. Re-make/Re-install hang rails (top and bottom). Believe it or not, some cabinet manufacturers rely of staples alone (no wood glue) to hold their cabinets together.
  • User
    hace 5 años

    What brand of import ish is that?

  • KS S1
    Autor original
    hace 5 años

    No idea. They are probably 16-18 years old, at this point

  • artistsharonva
    hace 5 años

    I would get a new cabinet.


    However,


    If want to salvage. Hankins suggestion of taking it down then wood gluing with clamps. A corner stapler costs, but it would be good to re-staple as well. Maybe you can rent or borrow. or use metal L brackets inside every 6" or so. Not as attractive as staples inside, but functional. Pre-drill before screwing. Use screws not as deep as panel or you'll go through. Looks like particle board which can easily damage & fall apart. Then rehang.




  • PRO
    Hankins & Associates, Inc. - Kitchens and Baths
    hace 5 años
    To be clear... I'd advocate new quality cabinets, carcasses made of plywood. But if the homeowner isn't ready to take the $$$ plunge... then repair is an option. As someone else mentioned, unless the walls are perfectly plumb (unlikely), the installer should've used shims. Simply screwing a cabinet to the wall, twisting and racking it, is a sure fire way to compromise its joinery. Especially if not made well in the first place.
  • Usuario de Houzz-962696928
    hace 3 años

    I have the same problem but my cabinet were hung together. my were shrock cabinets . They have a warranty on them but only for the original purchaser.

  • PRO
    Joseph Corlett, LLC
    hace 3 años

    This is installer error, not the fault of the cabinet or its quality. You bring the wall to the cabinet with shims, you do not take the cabinet to the wall with screws. This cabinet is self-destructing because it was "racked" or pulled out of square by a clueless installer.

Patrocinado

Volver a cargar la página para no volver a ver este anuncio en concreto

España
Personalizar mi experiencia con el uso de cookies

Houzz utiliza cookies y tecnologías similares para personalizar mi experiencia, ofrecerme contenido relevante y mejorar los productos y servicios de Houzz. Al hacer clic en 'Aceptar' confirmo que estoy de acuerdo con lo antes expuesto, como se describe con más detalle en la Política de cookies de Houzz. Puedo rechazar las cookies no esenciales haciendo clic en 'Gestionar preferencias'.